Miller Elite Series 소유자 매뉴얼 - 페이지 20
{카테고리_이름} Miller Elite Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller Elite Series 32 페이지. With external grind button auto-darkening helmets
Miller Elite Series에 대해서도 마찬가지입니다: 작동 지침 (32 페이지), 매뉴얼 (20 페이지), 소유자 매뉴얼 (32 페이지)
페이지 인쇄
SECTION 7 – REPLACING THE BATTERY
7-1.
Replacing The Batteries
To replace the batteries, remove the auto-
darkening lens assembly (see Section 6-1).
To replace the batteries,
1 Battery Tray
remove the auto-dark-
2 Digital Elite Lens
ening lens assembly
3 Digital Performance Lens
(see Section NO TAG).
1
Battery Tray
After removing the lens assembly, slide the
battery holding trays out and remove the old
2
Digital Elite Lens
batteries.
3
Digital Performance
Lens
Replace with Panasonic CR2450 lithium
batteries (2 required, Miller Part No.
After removing the lens
217043).
assembly, slide the bat-
tery holding trays out
and remove the old bat-
OM-256476 Page 18
1
1
teries.
Replace with Panasonic
CR2450 lithium batter-
ies (2 required, Miller
Part No. 217043).
Reinstall the
trays. To test, press the
On button. The display
2
�
Be sure Positive (+) side of the battery
faces up (toward inside of helmet).
Reinstall the battery trays. To test, press the
On button. The display screen should turn
on. Reinstall the lens assembly.
�
Left and right battery trays are not in-
terchangeable in the Digital Elite lens
Be sure Positive (+)
assembly. The auto-darkening helmet
side of the battery
will not work if battery trays are in-
faces up (toward in-
stalled on the wrong sides.
side of helmet).
battery
3
screen should turn on.
Reinstall the lens as-
sembly.
Left and right battery
trays are not inter-
changeable in the
Digital Elite lens as-
sembly.
The
to-darkening helmet
will not work if bat-
tery
trays
installed
on
wrong sides.
au-
are
the