ABB FIO-01 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} ABB FIO-01에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FIO-01 12 페이지. Digital i/o extension
ABB FIO-01에 대해서도 마찬가지입니다: 빠른 매뉴얼 (14 페이지)

Quick guide - FIO-01

Introduction

This manual contains the very basic information about installing

the FIO-01 Digital I/O Extension. For complete documentation see

FIO-01 Digital I/O Extension User's Manual

[3AFE68784921 (English)]. To find the manual, go to

http://www.abb.com/

Safety instructions

WARNING! All electrical installation and maintenance work on the

drive should be carried out by qualified electricians only.

The drive and adjoining equipment must be properly earthed.

Do not attempt any work on a powered drive. After switching off

the mains, always allow the intermediate circuit capacitors to

discharge for 5 minutes before working on the frequency

converter, the motor or the motor cable. It is good practice to

check (with a voltage indicating instrument) that the drive is in fact

discharged before beginning work.

These warnings are intended for all who work on the drive.

Ignoring the instructions can cause physical injury or death, or

damage the equipment.

For complete safety instructions see the drive manuals.

Mounting

WARNING! Before installation, switch off the drive power supply.

Wait for five minutes to ensure that the capacitor bank of the drive

is discharged. Switch off all dangerous voltages connected from

external control circuits to the inputs and outputs of the drive.

Quick guide - FIO-01

and search with the code 3AFE68784921.