AQUAPHOR OSMO PRO 50 EU 매뉴얼 - 페이지 11
{카테고리_이름} AQUAPHOR OSMO PRO 50 EU에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUAPHOR OSMO PRO 50 EU 16 페이지.
페이지 인쇄
Safety
Installation:
It is not recommended to do the work
on connecting OSMO Pro to the wa-
ter supply network yourself. To con-
nect OSMO Pro, it is recommended
to contact the service department
of Aquaphor or regional dealers of
Aquaphor. The manufacturer is not
responsible for the improper quali-
ty of work on connecting with the
OSMO Pro to the water supply net-
work, as well as for the result of this
work. The responsibility for the short-
comings of this work, as well as for
causing harm to the health or property
of the consumer or other persons as
a result of these shortcomings, by the
party performing the installation.
It is forbidden to replace the con-
nection unit included in the kit with
a connection unit of another model.
During operation:
OSMO Pro is designed for post-treat-
ment and softening of cold drinking
water from centralized water supply
systems. When installing OSMO Pro
outside of central drinking water sup-
ply systems, it is to do source water
analysis for compliance with sanitary
standards. If the source water does not
meet sanitary standards, the service
life of the prefiltration unit and mem-
brane unit is sharply reduced.
If the source water differs significant-
ly from the requirements of sanitary
standards, it is recommended to install
additional water treatment systems
(iron remover, softener, dechlorina-
tor, disinfection systems, mechanical
cleaning, etc.). After installing OSMO
Pro, you need to check the purified
water. In the future, to ensure that the
OSMO Pro is working properly, the
treated water should be checked ap-
proximately once a year. If the results
of the analysis are unsatisfactory, the
water should not be drunk, you should
contact the service centre.
Although OSMO Pro is capable of trap-
ping bacteria that may be contained
in the source water, it is recommend-
ed to use the water purifier only with
microbiologically safe water. Do not
use the system with water of unknown
quality that has not undergone addi-
tional disinfection.
Use OSMO Pro only for water purifica-
tion from a cold water supply system.
If the ambient temperature during op-
eration of OSMO Pro reaches +38 °C,
OSMO Pro must be disconnected from
the cold water main until the temper-
ature drops.
Purified water is not subject to long-
term storage. We recommend using
fresh filtered water.
If you have not used the water purifier
for more than 8 hours, drain the first
250 ml of water.
If it is known that OSMO Pro will not
be used for a day or more (for exam-
ple, when leaving the country), it must
be disconnected from the cold water
main (the connection point is closed).
If you have not used OSMO Pro for
more than two weeks, fill and drain
the water storage tank and let it refill.
Protect OSMO Pro from freezing, di-
rect sunlight, contact with hot objects,
including hot water pipes and heating
systems.
Protect OSMO Pro from bumps and
drops.
11