Chronomite CMT-4.0 설치 및 작동 지침 매뉴얼 - 페이지 12

{카테고리_이름} Chronomite CMT-4.0에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Chronomite CMT-4.0 16 페이지. Electric mini tank water heaters

MAINTENANCE INSTRUCTIONS (Continued)

Replacing the Heating Element

1. Unplug and drain the water heater (see prior instructions).

2. Remove heating element noting original positions of all connections.

3. Install new element with gasket making sure the new element and gasket are positioned

correctly.

4. Tighten retaining nuts and make the wire connections to their original locations.

Changing the Thermostat

1. Turn off the power switch and unplug the water heater from the electric outlet.

2. Drain and remove the water heater. (see page 11)

3. Remove six screws retaining the bottom panel of the water heater and remove the panel.

4. Remove thermostat knob and unscrew two retaining screws. It may be necessary to pry the

knob off of the thermostat spindle. Now remove front panel.

5. Disconnect the push-pull wire connectors on the thermostat noting which connector goes to

which terminal. Terminals are marked.

6. Remove the thermostat probe from the well.

7. Install new thermostat, attach wires and tighten screws.

Thermostat

3100-010-001

10/17 REV 1

ELECTRIC TANK WATER HEATER - POINT OF USE

TOLL FREE 800-447-4962 • LOCAL 626-937-4270 • FAX 626-937-4279

Page 12 of 16

Chronomite Laboratories is a Member of Morris Group International™

CHRONOMITE TECHNICAL SUPPORT