AquaPurr eC 사용자 설명서 - 페이지 9

{카테고리_이름} AquaPurr eC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaPurr eC 12 페이지.
AquaPurr eC에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)

Adjusting Motion Sensor Settings

You can customize the following settings of the AquaPurr eC motion sensor by making

some electronic adjustments:

1) Operation under dark and bright light conditions

2) Sensitivity to motion

3) Time delay (run time)

Open the AquaPurr eC base unit to locate the electronics shown.

1) Dark and bright light operation:

Switch 1 should always be in the

position shown. In this position, the

motion sensor will work both in

darkness and brightness.

2) Sensitivity to motion:

Switch 2 controls the sensitivity. It

is set to low when the AquaPurr eC

is sent to you, as shown in the

photo.

3) Time Delay (run time):

Switches 3 through 8 control the

amount of time the AquaPurr eC

stays on after the motion sensor is

triggered. And, each time the

motion sensor is re-triggered, the

timer restarts.

The time delay switches must be

used individually. Only one of the

switches 3 through 8 should be in

the "on" position.

AquaPurr eC

Page 8 of 11