AquaPurr eC Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AquaPurr eC. AquaPurr eC 12 pagina's.
Ook voor AquaPurr eC: Handmatig (4 pagina's)

Pagina afdrukken

Adjusting Motion Sensor Settings

You can customize the following settings of the AquaPurr eC motion sensor by making
some electronic adjustments:
1) Operation under dark and bright light conditions
2) Sensitivity to motion
3) Time delay (run time)
Open the AquaPurr eC base unit to locate the electronics shown.
1) Dark and bright light operation:
Switch 1 should always be in the
position shown. In this position, the
motion sensor will work both in
darkness and brightness.
2) Sensitivity to motion:
Switch 2 controls the sensitivity. It
is set to low when the AquaPurr eC
is sent to you, as shown in the
photo.
3) Time Delay (run time):
Switches 3 through 8 control the
amount of time the AquaPurr eC
stays on after the motion sensor is
triggered. And, each time the
motion sensor is re-triggered, the
timer restarts.
The time delay switches must be
used individually. Only one of the
switches 3 through 8 should be in
the "on" position.
AquaPurr eC
Page 8 of 11