AQUARAY GROBEAM 설치 및 사용 설명서 지침 - 페이지 3

{카테고리_이름} AQUARAY GROBEAM에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUARAY GROBEAM 6 페이지. Solid state lighting systems

페이지 인쇄

QU BE M/GROBE M LIGHTING STRIP P RTS LIST/DIMENSIONS

1. Power supply unit (PSU) - with single or twin DC outlets.

2. Mains power supply cord with UK, European or USA plug configuration.

3. AquaBeam/GroBeam lamp unit - double or single lamp units with 3m (10ft)

cable complete with matching plug connector to the DC outlet from the PSU.

4. Fixing brackets - two supplied.

5. Fixing kit.

35mm

QU BE M/GROBE M LIGHTING TILE P RTS LIST/DIMENSIONS

1. Power supply unit (PSU) - with twin DC outlets.

2. Mains power supply cord with UK, European or USA plug configuration.

3. AquaBeam/GroBeam lamp unit - with 3m (10ft) cable complete with

matching plug connectors to the DC outlets from the PSU.

4. Fixing bracket – two supplied per lamp unit.

5. Fixing kit (not shown).

6. AquaRay PowerControl unit (only supplied with "AquaBeam/GroBeam +

PowerControl" lamp units).

SSEMBLY

AquaRay lamp units are fully assembled and ready to use.

INST LL TION

Please note: These lamp units are NOT designed to be operated partially or

fully submerged. They must be SECURELY mounted not less than 25mm

from the maximum water level of the aquarium.

The versatile, compact and light-weight design allows the AquaRay lamp units

to be installed above your aquarium in a variety of ways to suit any application.

The design of the lamp units means they are able to be fitted in close proximity

to the surface of the aquarium. However, mounting further from the surface of

the aquarium will maximise the spread of light from the AquaRay's unique wide-

angled beam

QU BE M/GROBE M LIGHTING STRIP

. Using quaBeam/GroBeam fixing brackets for more permanent

attachment with six screws (stainless steel self tap, or nylon nut and

bolt – all supplied) to the INSIDE or UNDERSIDE of a wooden or

metal hood or other enclosure.

Caution: To securely attach

the bracket to the wooden or

metal hood or other

enclosure, all six screws must

be used.

47.5 mm

490mm

Depth = 45mm

198 mm

Depth = 198 mm

Caution: Before the

brackets have been

attached to the

wooden or metal

hood or other

enclosure using all six

screws, make sure that

they are fully pushed

onto the metal rail of

the heat sink.

MAX.

3 x AquaBeam/GroBeam