AQUARAY GROBEAM Instrukcja instalacji i użytkowania - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Sprzęt oświetleniowy AQUARAY GROBEAM. AQUARAY GROBEAM 6 stron. Solid state lighting systems
Drukuj stronęQU BE M/GROBE M LIGHTING STRIP P RTS LIST/DIMENSIONS
1. Power supply unit (PSU) - with single or twin DC outlets.
2. Mains power supply cord with UK, European or USA plug configuration.
3. AquaBeam/GroBeam lamp unit - double or single lamp units with 3m (10ft)
cable complete with matching plug connector to the DC outlet from the PSU.
4. Fixing brackets - two supplied.
5. Fixing kit.
35mm
QU BE M/GROBE M LIGHTING TILE P RTS LIST/DIMENSIONS
1
2
6
1. Power supply unit (PSU) - with twin DC outlets.
2. Mains power supply cord with UK, European or USA plug configuration.
3. AquaBeam/GroBeam lamp unit - with 3m (10ft) cable complete with
matching plug connectors to the DC outlets from the PSU.
4. Fixing bracket – two supplied per lamp unit.
5. Fixing kit (not shown).
6. AquaRay PowerControl unit (only supplied with "AquaBeam/GroBeam +
PowerControl" lamp units).
SSEMBLY
AquaRay lamp units are fully assembled and ready to use.
INST LL TION
Please note: These lamp units are NOT designed to be operated partially or
fully submerged. They must be SECURELY mounted not less than 25mm
from the maximum water level of the aquarium.
The versatile, compact and light-weight design allows the AquaRay lamp units
to be installed above your aquarium in a variety of ways to suit any application.
The design of the lamp units means they are able to be fitted in close proximity
to the surface of the aquarium. However, mounting further from the surface of
the aquarium will maximise the spread of light from the AquaRay's unique wide-
angled beam
1.
QU BE M/GROBE M LIGHTING STRIP
. Using quaBeam/GroBeam fixing brackets for more permanent
attachment with six screws (stainless steel self tap, or nylon nut and
bolt – all supplied) to the INSIDE or UNDERSIDE of a wooden or
metal hood or other enclosure.
Caution: To securely attach
the bracket to the wooden or
metal hood or other
enclosure, all six screws must
be used.
5
4
47.5 mm
4
3
490mm
Depth = 45mm
4
198 mm
Depth = 198 mm
2
1
2
3
4
Caution: Before the
brackets have been
attached to the
wooden or metal
hood or other
enclosure using all six
screws, make sure that
they are fully pushed
onto the metal rail of
the heat sink.
MAX.
3 x AquaBeam/GroBeam