Panasonic AG-AC160AP 사용 설명서 - 페이지 6

{카테고리_이름} Panasonic AG-AC160AP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-AC160AP 42 페이지. Broadcast-grade camera recorder with 22x zoom lens and 2.2 megapixel u.l.t. image sensor
Panasonic AG-AC160AP에 대해서도 마찬가지입니다: 빠른 매뉴얼 (1 페이지)

페이지 인쇄

For AG-AC160AEJ Only

Caution for AC Mains Lead

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc.

and the other one is only for U.K.

Appropriate mains cable must be used in each local area, since the other type of mains cable is

not suitable.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 13 amp fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a rating

of 13 amps and that it is approved by ASTA

or BSI to BS1362.

Check for the ASTA mark

on the body of the fuse.

If the plug contains a removable fuse cover

you must ensure that it is refitted when the

fuse is replaced.

If you lose the fuse cover the plug must

not be used until a replacement cover is

obtained.

A replacement fuse cover can be purchased

from your local Panasonic Dealer.

WARNING:

T his equipment must be earthed

To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power

point which is effectively earthed through normal house-hold wiring.

Extension cords used with the equipment must have three cores and be correctly wired to provide

connection to the earth. Wrongly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power point is earthed

or that the installation is completely safe. For your safety, if you are in any doubt about the effective

earthing of the power point, please consult a qualified electrician.

For AC adaptor

FOR U.K. ONLY

How to replace the fuse

1. Open the fuse compartment with a

or the BSI mark

2. Replace the fuse.

indicates safety information.

screwdriver.

Fuse