Panasonic AG-AC160AP Operating Instructions Manual - Page 6
Browse online or download pdf Operating Instructions Manual for Camcorder Panasonic AG-AC160AP. Panasonic AG-AC160AP 42 pages. Broadcast-grade camera recorder with 22x zoom lens and 2.2 megapixel u.l.t. image sensor
Also for Panasonic AG-AC160AP: Quick Manual (1 pages)
For AG-AC160AEJ Only
Caution for AC Mains Lead
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc.
and the other one is only for U.K.
Appropriate mains cable must be used in each local area, since the other type of mains cable is
not suitable.
FOR CONTINENTAL EUROPE, ETC.
Not to be used in the U.K.
FOR U.K. ONLY
This appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA
or BSI to BS1362.
Check for the ASTA mark
on the body of the fuse.
If the plug contains a removable fuse cover
you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be purchased
from your local Panasonic Dealer.
WARNING:
T his equipment must be earthed
To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power
point which is effectively earthed through normal house-hold wiring.
Extension cords used with the equipment must have three cores and be correctly wired to provide
connection to the earth. Wrongly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the power point is earthed
or that the installation is completely safe. For your safety, if you are in any doubt about the effective
earthing of the power point, please consult a qualified electrician.
6
For AC adaptor
FOR U.K. ONLY
How to replace the fuse
1. Open the fuse compartment with a
or the BSI mark
2. Replace the fuse.
indicates safety information.
screwdriver.
Fuse