Panasonic AG-HMC40PJ 매뉴얼 - 페이지 7

{카테고리_이름} Panasonic AG-HMC40PJ에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HMC40PJ 14 페이지. Editing avchd with imovie 09
Panasonic AG-HMC40PJ에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지), 매뉴얼 (19 페이지), 매뉴얼 (18 페이지), 매뉴얼 (13 페이지)

페이지 인쇄

There is another way to set the codec to prores (lT) and you do this in the log and Transfer process.

sTeP #3a - ClICk fIle > log anD TRansfeR

Click on AVCHD to set the codec to ProRes (LT) and then click OK

sTeP #4 - ClICk fIle > log anD TRansfeR

To begin to work with your AVCHD footage, click File

and then Log and Transfer.

This will open the log and transfer window. Many tape-

based editors have the tendency to simply grab all the

clips and drag them to the lower left hand section of

the screen and transcode everything. This is the same

as batch digitizing, and it usually is not necessary and

a waste of drive space and transcode time. Since we

are now working with a file-based format, it is a better

practice to only transcode the section of any particular

clip you need. Your AVCHD clips will appear on the left side of the screen. Clicking on any

individual clip will open it in the browser. Here you can rename the clip. You can also mark rough

"in" and "out" points for the clip. This is a good idea as the clip still has to be transcoded and using

only what you need of the clip will speed this process.

When the window opens, press the tool gear (to the right under the word Transfer) on the

top right of the bin pane and select Preferences.