AquaScape PRO AIR 60 POND 운영 지침 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} AquaScape PRO AIR 60 POND에 대한 운영 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape PRO AIR 60 POND 12 페이지. Aeration kit

STEP 1

UNPACK KIT COMPONENTS

• Carefully unpack the kit components.

STEP 2

SET COMPRESSOR

• Set the compressor in the desired location. Select a

location near a ground fault circuit interrupter (GFCI) rated

receptacle.

Note: Do not submerge

the compressor in water.

We recommend placing

it in a location above the

pond's water level, whenever

possible, to prevent

water from entering the

compressor.

STEP 3

ATTACH MANIFOLD

• Thread the 2-way manifold into the discharge of the

compressor. The 2-way manifold provides the option of

installing up to two separate airlines with the added benefit

of airflow valve controls.

STEP 4

ATTACH TUBING

• Attach the braided tubing with the pre-installed check

valves to each manifold outlet.

Note: The check valve is designed to prevent water

from siphoning back through the tubing and entering the

compressor. Failure to install the check valve may result

in the compressor being permanently damaged, voiding

the warranty. Confirm that the check valves are facing the

correct direction by verifying that air is able to flow freely

through the tubing toward the diffuser.

STEP 5

SECURE TUBING TO MANIFOLD

• Use the stainless steel hose clamps to secure the tubing

to the manifold outlets.

STEP 6

ATTACH DIFFUSERS

• Attach the other end of the braided tubing to the diffusers.

☎

US (866) 877-6637 |

CAN (866) 766-3426 | aquascapeinc.com