AquaScape PRO AIR 60 POND 운영 지침 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} AquaScape PRO AIR 60 POND에 대한 운영 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape PRO AIR 60 POND 12 페이지. Aeration kit

STEP 7

SECURE TUBING TO DIFFUSERS

• Use the stainless steel hose clamps to secure the tubing

onto each diffuser.

STEP 8

SET DIFFUSERS IN POND

• Set the diffusers in the pond.

Winter Application

• The aeration kit can be used during winter months where bubbles and water movement

created at the surface help to maintain a small opening in the ice for oxygenation. DO NOT

place the diffusers on the bottom of the pond during winter, as it may disrupt the natural

thermocline found in the deeper portions of the pond where the fish are overwintering. Place

the diffuser about 1 to 1.5 feet below the surface of the water.

• The inlet sponge filter should be checked annually or if the compressor makes any abnormal

noises. If operating the unit in dusty conditions, you will need to check it more frequently. The

filter is easily inspected by gently popping off the top plastic compressor cover. The sponge

filter and lid can be rinsed in clean water and thoroughly dried before replacing.

• The compressor components can be completely replaced, as needed, to maximize

functionality. Use the Pro Air 60 Air Inlet Sponge Filters and Pro Air 60 Replacement

Diaphragm to refresh the compressor.

• Winter care: the Pro Air 60 can be operated through freezing winters. If not running the

compressor through the winter, it is recommended to cover the compressor or store it in a frost-free location.

☎

aquascapeinc.com |

CAN (866) 766-3426 |

STEP 9

PLUG IN COMPRESSOR

• Plug the compressor

into a ground fault circuit

interrupter (GFCI) rated

receptacle and enjoy the

benefits!

☎

US (866) 877-6637