Chrysler AUX-CH3 설치 매뉴얼 - 페이지 2

{카테고리_이름} Chrysler AUX-CH3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Chrysler AUX-CH3 4 페이지. Auxiliary input jack, with external changer or sirius

페이지 인쇄

Introduction:

Many Chrysler owners with Sirius Radio and/or External CD

Changers will be pleased to know that it is no longer necessary to

disconnect these options in order to connect an auxiliary device.

Connecting an Auxiliary adapter to most cars requires disconnecting

the Satellite Radio or

external CD Changer**

AUX- - - - CH

AUX

CH3 3 3 3 requires and

requires and retains the option

retains the option and provides a 3.5mm

AUX

requires and

retains the option

Audio jack which can be used to connect and play all kinds of audio

devices including Smartphones, MP3 Players, iPods etc. For more

details, see Frequently Asked question

Frequently Asked question

Frequently Asked question at the end of this guide.

Installation:

Remove Chrysler Radio from dashboard to gain access to the

connector. (Vehicle specific radio removal instructions are not

part of this guide, but may be available upon request)

Once radio has been removed, disconnect the factory 10-

way plug (See Fig. 1

Fig. 1) from the Radio (See Fig.

Fig. 1

10-way Plug

All manuals and user guides at all-guides.com

option

option ; however the

option

Fig. 2 2 2 2 )

Fig.

Fig. 2

Chrysler Radio connectors

Connect the factory 10-way plug removed in step 1 to the 10-

way connector on the adapter harness (See Fig.

Fig.

Fig. 3 3 3 3

Fig.

Adapter harness 10-way connector

Connect the 10-way plug (See. Fig. 1

the adapter harness to the 10-way connector on the Radio

Carefully route the audio jack (See Fig. 4

the dash or nearby panel where it will be mounted (within

3.5 ft.) The location will vary based on vehicle and

customer's preference.

Fig. 4

Audio Jack

See Fig. 3 3 3 3 ) ) ) )

See Fig.

. Fig. 1) on the other end of

. Fig. 1

Fig. 4) to a location on

Fig. 4