AquaScape Pro Air 60 운영 지침 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} AquaScape Pro Air 60에 대한 운영 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape Pro Air 60 12 페이지. Diaphragm replacement
AquaScape Pro Air 60에 대해서도 마찬가지입니다: 설치 지침 (2 페이지)

페이지 인쇄

1. Replacement Parts

Instructions

STEP 1

SET COMPRESSOR

• Set the compressor in a location near a ground fault circuit

interrupter (GFCI) rated receptacle.

NOTE: Do not submerge

the compressor in water.

We recommend placing

it in a location above

the pond's water level,

whenever possible,

to prevent water from

entering the compressor.

STEP 2

THREAD MANIFOLD

• Thread the 2-way manifold into the discharge of the

compressor. The 2-way manifold provides the option of

installing up to two separate airlines with the added benefit

of airflow valve controls.

STEP 3

ATTACH TUBING TO MANIFOLD

• Attach tubing with airline check valves to each manifold

outlet. It is recommended to use hose clamps to secure

the tubing to the manifold outlet. If installing only one

airline, close the unused valve before use.

NOTE: Installing check valves will prevent water from

siphoning back through the tubing and entering the

compressor. Failure to properly install check valves may

result in the compressor being permanently damaged,

voiding the warranty.

STEP 4

ATTACH TUBING TO DIFFUSERS

• Attach the other end of the tubing to the diffuser(s). It is

recommended to use hose clamps to secure the tubing

onto each diffuser.

STEP 5

SET DIFFUSERS IN POND

• Set the diffuser(s) in the pond.

STEP 6

PLUG IN COMPRESSOR

• Plug the compressor

into a ground fault circuit

interrupter (GFCI) rated

receptacle and enjoy the

benefits!

☎

US (866) 877-6637 |

CAN (866) 766-3426 | aquascapeinc.com