AquaScape Pro Air 60 운영 지침 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} AquaScape Pro Air 60에 대한 운영 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape Pro Air 60 12 페이지. Diaphragm replacement
AquaScape Pro Air 60에 대해서도 마찬가지입니다: 설치 지침 (2 페이지)

페이지 인쇄

1. Replacement Parts

Winter Application

• The aeration compressor can be used during winter months where bubbles and water

movement created at the surface help to maintain a small opening in the ice for

oxygenation. DO NOT place diffusers on the bottom of the pond during winter, as it may

disrupt the natural thermocline found in the deeper portions of the pond where the fish are

overwintering. Place the diffuser about 1 to 1.5 feet below the surface of the water.

General Maintenance

• The inlet sponge filter should be checked annually or if the compressor makes any abnor-

mal noises. If operating the unit in dusty conditions, you will need to check it more frequent-

ly. The filter is easily inspected by gently popping off the top plastic compressor cover. The

sponge filter and lid can be rinsed in clean water and thoroughly dried before replacing.

• The compressor components can be completely replaced, as needed, to maximize

functionality. Use the Pro Air Inlet Sponge Filters (#61005) and Pro Air 60 Replacement

Diaphragm (#61007) to refresh the compressor.

• Winter care: the Pro Air 60 can be operated through freezing winters. If not running the

compressor through the winter, it is recommended to cover the compressor or store it in a

frost-free location.

Troubleshooting

• Reduced or no air flow

– Make sure the check valve is oriented in the proper open direction by verifying that air is able to flow freely through the

tubing toward the diffuser

– Make sure tubing is not kinked or restricted

 Should a kinked tube or dirty membrane significantly block air flow, shut down the compressor immediately to prevent

overheating

– Check the air inlet sponge filter for clogging and clean or replace if necessary

– Compressor not working

 The GFCI may have tripped

 The compressor is not receiving the correct voltage

Replacement Parts

Pro Air 60 Aeration Compressor Replacement Parts

No.

Item number/description

61016 - Pro Air 60 Aeration Compressor

61012 - 2-Way Aeration Compressor Manifold

61005 - (3) Pro Air 60 Air Inlet Sponge Filters

61004 - Pro Air 60 Compressor Lid

61007 - Pro Air 60 Replacement Diaphragm (not pictured)

☎

aquascapeinc.com |

CAN (866) 766-3426 |

☎

US (866) 877-6637