Chubbsafes PRIMUS / E-LOCK PS600 사용 설명서 - 페이지 5
{카테고리_이름} Chubbsafes PRIMUS / E-LOCK PS600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Chubbsafes PRIMUS / E-LOCK PS600 7 페이지. With electronic lock For more information, please visit www.chubbsafes.com
페이지 인쇄
2.4. Cancelation of user-code
- Press «ON»;
- Press «ENTER»;
- Press «0»;
- Press «ENTER»;
- Enter valid master-code and press«ENTER»;
The user code can only be cancelled by a valid master-code.
2.5. Programming of Time delay and Opening window.
The time delay (TD) function refers to the period of time which must elapse before the lock can be
opened.
The opening window (OW) is the period in which the lock may be opened after the TD has elapsed. Any
valid code can be provided with a TD or OW function.
- Press «ON»;
- Press «EN»
-Press «6»;
-Press «ENTER»
-Enter valid user code or master-code and press «#»
-Enter a 2-digit number that will stand for the TD (01 -99 minutes) and a number for the OW (1-9
minutes).
For example: 092 – 9 minutes for TD, and 2 minutes – for the OW.
- Press «EN»;
Opening with the help of the programmed TD and OW.
- Press «ON»;
- Enter valid user-code or master-code: green visual LED
- Automatic start of TD: red visual and acoustic signal and every 5 seconds
- After end of TD – acoustic signal
- Automatic start of OW: green visual and acoustic signal every 5 seconds
-Enter valid code once again during OW: green visual signal
-If the code is correct the device works as indicated step 3.1.1 or 3.1.2.
By pressing «ENTER» during TD period this function is interrupted. The entire sequence must then be
repeated in order to open again.
Ref OP-0012-A April 2015
Page 5