Panasonic WV-SC384 설치 매뉴얼 - 페이지 28

{카테고리_이름} Panasonic WV-SC384에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SC384 40 페이지. Ip video cameras
Panasonic WV-SC384에 대해서도 마찬가지입니다: 설치 매뉴얼 (40 페이지), 사양 (2 페이지), 설치 매뉴얼 (40 페이지), 통합 참고 사항 (8 페이지)

페이지 인쇄

Configure the network settings

Configuring the camera so that it can be accessed from a PC

The following are descriptions for when the camera with default settings is configured. If you are using firewall soft-

ware on your PC, the Setup Program may not be able to find any cameras on your network. Configure the setting of

the camera after temporarily invalidating the firewall software. Contact the network administrator or your Internet

service provider for information about configuring the settings of the network.

Insert the provided CD-ROM into the CD-ROM drive of your PC.

• The License Agreement will be displayed. Read the Agreement and choose "I accept the term in the license agree-

ment", and click [OK].

• The launcher window will be displayed. If the launcher window is not displayed, double click the "CDLauncher.

exe" file on the CD-ROM.

Note:

• Refer to "Using the CD-ROM" in the Operating Instructions on the provided CD-ROM for further information about

CDLauncher.

Click the [Run] button next to [IP Setting Software].

[Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after selecting the MAC address/IP

address of the camera to be configured.

Select the camera you want to configure, and click [Access Camera].

Note:

• When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC

address printed on the camera that you want to configure.