Panasonic WV-SC385 설치 매뉴얼 - 페이지 19
{카테고리_이름} Panasonic WV-SC385에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WV-SC385 36 페이지. Ip video cameras
Panasonic WV-SC385에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (40 페이지), 비교 차트 (6 페이지), 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (40 페이지), 통합 참고 사항 (8 페이지)
페이지 인쇄
• 12 V DC power supply terminal
q Loosen the screw of the power cord plug (accessory).
w Connect the cable of the 12 V DC power supply* to
the power cord plug.
Strip 3 mm to 7 mm {1/8" to 9/32"} from the end of
the wire, and twist the stripped part of the wire suffi-
ciently to avoid short circuit.
Specification of cable (wire): 16 AWG - 24 AWG,
Single core, twisted
• Check whether the stripped part of the wire is not
exposed and is securely connected.
e Tighten the screw of the power cord plug.
r Connect the power cord plug to the 12 V DC power
supply terminal on the rear of the camera.
* FOR UL LISTED MODEL(S), ONLY CONNECT 12 V
DC CLASS 2 POWER SUPPLY.
+
–
12 V DC power cord plug
(accessory)
Important:
• The 12 V DC power supply shall be insulated from the
commercial AC power.
• Be sure to use the power cord plug provided with this
product.
• Be sure to fully insert the power cord plug into the
12 V DC power supply terminal. Otherwise, it may
damage the camera or cause malfunction.
• Be sure to use an AC adapter compliant with the
Specifications regarding power source and power
consumption (☞ page 31).
Strip range
Approx. 3 mm - 7 mm
{1/8" - 9/32"}
Step 9
After completing the cable connections, attach the deco-
rative cover (accessory).
q Align the indication "OPEN" of the decorative cover to
the decorative cover guide of the camera mount
bracket.
w Rotate the decorative cover clockwise until the indica-
tion "LOCK" reaches the decorative cover guide of
the camera mount bracket.
LO CK
O P E
N
Important:
• Make sure that no cable is pinched by the decorative
cover.
Decorative cover guide
LO C K
O P E
N
Decorative cover (accessory)
Decorative
cover guide
LOCK
OPEN
LOCK
OPEN
19