Panasonic WVNF302 - NETWORK CAMERA 설치 매뉴얼 - 페이지 24
{카테고리_이름} Panasonic WVNF302 - NETWORK CAMERA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNF302 - NETWORK CAMERA 36 페이지. Ip video cameras
Panasonic WVNF302 - NETWORK CAMERA에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 사용 설명서 (20 페이지), 참조 (2 페이지), 비교 차트 (6 페이지), 통합 참고 사항 (8 페이지), 사용 설명서 (20 페이지)
페이지 인쇄
Important:
• Do not connect 2 wires or more directly
to a terminal. When it is necessary to
connect 2 wires or more, use a splitter.
• Connect an external device with verifying
that the ratings are within the specifica-
tions below.
e Insert the external I/O terminals plug to
the external I/O terminals on the mount-
ing side of the camera firmly.
* Make sure that the external I/O terminals
plug is inserted to the external I/O termi-
nals firmly.
External I/O terminals
<Ratings>
e AUX output (AUX)
w Alarm output
(ALARM OUT)
q Alarm input (ALARM IN)
q ALARM IN
No-voltage make contact input (4-5 V DC
pulled up)
OFF: Open or 4-5 V DC
ON: Make contact with GND (required
drive current: 1 mA or more)
24
GND
AUX
ALARM OUT
ALARM IN
w ALARM OUT
Open collector output (external max.
applied voltage: 20 V DC)
Open: 4-5 V DC, internally pulled up
Close: Output voltage of 1 V DC or less
(50 mA or less)
e AUX
Same as ALARM OUT w