Panasonic WVNS954 - NETWORK CAMERA 설치 매뉴얼 - 페이지 20
{카테고리_이름} Panasonic WVNS954 - NETWORK CAMERA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNS954 - NETWORK CAMERA 31 페이지. Ip video cameras
Panasonic WVNS954 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용 설명서 (21 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 통합 참고 사항 (8 페이지), 사용 설명서 (21 페이지)
페이지 인쇄
Connection
Caution:
Before starting connection, make sure that the circuit breaker is switched off. Failure to do so could result in fire,
injury, electric shock or property destruction.
Power cable
Ethernet cable connector
Data transmission
Data reception
20
Network cable
Output cable for
adjustment-specific
monitor
(BNC)
External I/O
cables
Microphone input cable (white)
To a plug-in power type microphone
Audio output cable (black)
To an external powered speaker
*1: The grounding wire should be connected to ground.
External I/O cable connector
Red
q
TX+
Orange
w
TX+
e
RX+
Yellow
r
t
y
RX-
Green
u
i
To an outlet (24 V AC, 60Hz)
1
Grounding wire *
Ethernet cable
RJ45 conversion connector (provided)
Coaxial cable
8P alarm cable (provided)
ALARM IN1/BW IN (black) (EXT I/O 1)
GND (brown)
ALARM IN2/ALARM OUT (red) (EXT I/O 2)
GND (orange)
ALARM IN3/AUX OUT (Yellow) (EXT I/O 3)
GND (light blue or green)
Unused (blue)
GND (purple)
To a hub, PC, etc.
To the monitor used for adjustment
To a sensor