Panasonic WVNW964 - NETWORK CAMERA 설치 매뉴얼 - 페이지 17
{카테고리_이름} Panasonic WVNW964 - NETWORK CAMERA에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic WVNW964 - NETWORK CAMERA 32 페이지. Ip video cameras
Panasonic WVNW964 - NETWORK CAMERA에 대해서도 마찬가지입니다: 사용 설명서 (21 페이지), 서비스 매뉴얼 (28 페이지), 브로셔 (2 페이지), 참조 (2 페이지), 참조 (2 페이지), 사양 (2 페이지), 통합 참고 사항 (8 페이지)
페이지 인쇄
Installation
Before starting installation/connection, make sure that the power cable is not connected to an outlet.
Read the "Precautions for installation" section before starting installation/connection. ( page 13)
Step 1
Install the mount bracket.
• Refer to "Mounting the Camera" (page 15).
Step 2
Insert a mini SD memory card into the mini SD memory
card slot.
• Refer to page 21 for how to insert a mini SD memo-
ry card.
Step 3
Connect the cables.
• Refer to page 18 for how to connect the cables.
Step 4
Mount the camera onto the mount bracket.
1. Mount the camera onto the housing attachment
base and fix them with the screws at 3 places
Housing attachment base
2. Attach the provided watertight caps onto the screw
heads.
Fixing screw
Watertight cap
(provided)
Step 5
Attach the provided front/rear sun shields to the cam-
era.
1. Hold the concave portions of the front/rear sun
shields with your fingers and disassemble it by
releasing the stoppers.
The front/rear sun shields are connected by the
wire to prevent losing one of them.
Concave portion
Release the stoppers
2. Position the front/rear sun shields to tuck down the
housing attachment base.
Housing attachment base
Front/rear sun shield
3. Attach the front/rear sun shields together.
Fit up the stopper on the wired side first, and then
fit up the stopper on the other side.
Front/rear sun shield
Safety wire
Wire
Sun shield
17