AquaStar StarzTruck 설치 매뉴얼 - 페이지 14

{카테고리_이름} AquaStar StarzTruck에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaStar StarzTruck 20 페이지. Automatic suction pool cleaner

페이지 인쇄

starztruck automatic pool cleaner troubleshootinG Guide

problem: cleaner sticks at steps, corners, etc.

CAUSES

Improper water flow

Worn shoes

Worn wings

Hose too short

Steering failure

starztruck automatic pool cleaner disclaimer

A. Pool plaster is affected by age, water chemistry, etc.

B. Pool plaster can deteriorate over a period of time.

C. T he integrity of "good" pool plaster is such that a pool

vacuum cleaner – automatic or manual – cannot remove

that plaster.

D. T he integrity of "good" pool plaster is such that the

plaster will cause wear on the StarzTruck automatic pool

cleaner – not vice versa.

E. Vinyl and fiberglass are affected by age, sunlight and

water chemistry.

F. Vinyl can become brittle and weak.

SOLUTIONS

Adjust water flow per step 3, Fig. 8

Replace shoes

Replace wings

Install additional hose per installation instructions

1. Check and clean rear screen

2. Check to see that cone gear is free and rotates

smoothly in both directions

3. Check steering program and troubleshoot – then:

A. clean, repair or replace gearbox

B. check pod/A-frame connection and replace

if necessary. Do not attempt to retighten

loose pods.

C. check medium turbine and spindle gear

assemblies

G. Vinyl can also be affected by the installation and the

pool's surroundings.

H. W hen installing the StarzTruck automatic pool cleaner,

you assume all responsibility for the condition of the pool

and the pool's surroundings.

To better serve you, please have the following information

available if you call AquaStar's Technical Support Department:

1. The purchase date and purchase location of your

StarzTruck automatic pool cleaner.

2. The serial number of your StarzTruck automatic pool

cleaner.

3. The number of hose sections used.