AquaSure AS-FP600 소유자 매뉴얼 - 페이지 9

{카테고리_이름} AquaSure AS-FP600에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaSure AS-FP600 12 페이지. Whole house water filter

STEP 5.

Installing the Filter

1. Unwrapped the filter and place it inside the housing and make sure the housing is

centering on the stand pipe.

2. Screw on the housing with the filter inside and screw onto the corresponding head by

turning it counterclockwise using the supplied housing wrench.

Note: Make sure the o-ring is inside the housing and do not over tightening the housing.

STEP 6.

System Startup

WARNING! Immediately shut off the main water supply valve if there are leaks. Check the

leak area and see if there's a loose connection or if more Teflon tape is needed to prevent

leaks from happening.

1. Turn on the main water supply valve fully by turning it counterclockwise.

2. Check for leaks

3. Turn on the nearest faucet and let the water run for 10 minutes to release any trapped air

bubble or carbon fine if a carbon filter is installed.

CONGRATULATION!

Your system is ready to use. Please document the filter installation time and replace the filter in the

suggested replacement time.

AQUASURE

FORTITUDE PRO SERIES