Panasonic AU-EVA1 설정 매뉴얼 - 페이지 4

{카테고리_이름} Panasonic AU-EVA1에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AU-EVA1 8 페이지. Connection to wi-fi & eva rop app ios & android
Panasonic AU-EVA1에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지)

페이지 인쇄

AU-EVA1 SETUP GUIDE

EVA1 + Android INFRA Connection

Wi-Fi INFRA connects

devices with the use of a

wireless access point. All

devices on the network will

communicate with the same

access point. This requires

a network and access point

to be set up and running.

Note:

AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.

First connect the Android device to the same network as the camera.

Next, open EVA ROP app.

– Enter IP Address after clicking on settings as shown in the picture.

– Exit MENU on camera and click ok, camera should connect.

– User ID and Password are optional and only needed if one is created and added in camera

under NETWORK FUNC.

If necessary:

Default User ID: guest (up to 31 characters)

Default Password: auguest (6-15 characters)

Take note of the IP address.

This will be needed for Android setup.

*The IP address may be different for your camera.