Panasonic AU-EVA1 매뉴얼

{카테고리_이름} Panasonic AU-EVA1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AU-EVA1 21 페이지. Connection to wi-fi & eva rop app ios & android
Panasonic AU-EVA1에 대해서도 마찬가지입니다: 설정 매뉴얼 (8 페이지)

페이지 인쇄

SKAARHOJ DEVICE CORES

Device: Panasonic AU-EVA1

Introduction

The Device Core "Panasonic EVA1" is used for controlling the AU-EVA1 camera. The goal of this manual is

to help conﬁguring a SKAARHOJ interface to control features available in the Device Core at this present

time.

Multicam Control

Please notice with the release of UniSketch v2.4.16 Multicam Control have been enabled. Prior to v2.4.16

only a single camera could be controlled from the Device Core. With the update up to 4 cameras can be

controlled from a single Device Core. Please see information in the section "Multicam Control"

Setting up Camera

In order to control the camera a USB/Ethernet adapter must be utilized from the USB2.0 HOST port on the

camera. All communication between a SKAARHOJ interface and the camera is done via IP. The

implementation have been done on version 0.00-00-8.02.

Panasonic recommends to use Plugable USB 3.0 Gigabit Eathernet Adapter or UGREEN USB3.0 to RJ45

Ethernet Adapter 20256