Panasonic AU-EVA1 Manual

Browse online or download pdf Manual for Digital Camera Panasonic AU-EVA1. Panasonic AU-EVA1 21 pages. Connection to wi-fi & eva rop app ios & android
Also for Panasonic AU-EVA1: Setup Manual (8 pages)

Print Page
Panasonic AU-EVA1 Manual
SKAARHOJ DEVICE CORES
Device: Panasonic AU-EVA1
Introduction
The Device Core "Panasonic EVA1" is used for controlling the AU-EVA1 camera. The goal of this manual is
to help configuring a SKAARHOJ interface to control features available in the Device Core at this present
time.
Multicam Control
Please notice with the release of UniSketch v2.4.16 Multicam Control have been enabled. Prior to v2.4.16
only a single camera could be controlled from the Device Core. With the update up to 4 cameras can be
controlled from a single Device Core. Please see information in the section "Multicam Control"
Setting up Camera
In order to control the camera a USB/Ethernet adapter must be utilized from the USB2.0 HOST port on the
camera. All communication between a SKAARHOJ interface and the camera is done via IP. The
implementation have been done on version 0.00-00-8.02.
Panasonic recommends to use Plugable USB 3.0 Gigabit Eathernet Adapter or UGREEN USB3.0 to RJ45
Ethernet Adapter 20256
1