Panasonic AW-HEA10KEJ 설치 및 운영 지침 매뉴얼 - 페이지 17
{카테고리_이름} Panasonic AW-HEA10KEJ에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AW-HEA10KEJ 40 페이지. Control assist cameras
Panasonic AW-HEA10KEJ에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지)
페이지 인쇄
How to remove the camera
How to remove the HD integrated camera
The illustrations are examples for when the AW-HE130 is installed suspended. The procedures for the AW-HE40 and when installed standing are the
same.
1.
Turn off the circuit breaker and power.
2.
Remove the cable cover and disconnect the cables.
• For how to remove the cover and disconnect the cables, refer to Operating Instructions or Installation Instructions for the HD integrated camera.
3.
Remove the mounting screw securing the HD integrated camera and unit together.
4.
Push the HD integrated camera (A), rotate it approx. 20° (B) in the opposite direction as installation, and remove it (C).
Mounting screw
<NOTE>
• Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
5.
Disengage the drop‑prevention wire from the mount bracket.
A Pull the drop‑prevention
wire in the direction shown
by the arrow above.
B Twist the wire, and remove
the wire loop through the
opening in the hook.
Approx. 20°
C Pull the wire in the direction
shown by the arrow above, and
simply pull it out.
17