Panasonic AW-HEA10KEJ Посібник з монтажу та експлуатації - Сторінка 17
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Цифрова камера Panasonic AW-HEA10KEJ. Panasonic AW-HEA10KEJ 40 сторінок. Control assist cameras
Також для Panasonic AW-HEA10KEJ: Інструкція з експлуатації Посібник з експлуатації (34 сторінок)
Друкувати сторінку
How to remove the camera
How to remove the HD integrated camera
The illustrations are examples for when the AW-HE130 is installed suspended. The procedures for the AW-HE40 and when installed standing are the
same.
1.
Turn off the circuit breaker and power.
2.
Remove the cable cover and disconnect the cables.
• For how to remove the cover and disconnect the cables, refer to Operating Instructions or Installation Instructions for the HD integrated camera.
3.
Remove the mounting screw securing the HD integrated camera and unit together.
4.
Push the HD integrated camera (A), rotate it approx. 20° (B) in the opposite direction as installation, and remove it (C).
Mounting screw
<NOTE>
• Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
5.
Disengage the drop‑prevention wire from the mount bracket.
A Pull the drop‑prevention
wire in the direction shown
by the arrow above.
B Twist the wire, and remove
the wire loop through the
opening in the hook.
Approx. 20°
C Pull the wire in the direction
shown by the arrow above, and
simply pull it out.
17