Panasonic CF-H2 series 사용 설명서 - 페이지 16

{카테고리_이름} Panasonic CF-H2 series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic CF-H2 series 40 페이지. Personal computer
Panasonic CF-H2 series에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 작동 지침 (36 페이지), 사용 설명서 (36 페이지), 사용 설명서 (32 페이지), 추가 지침 매뉴얼 (17 페이지)

페이지 인쇄
Panasonic CF-H2 series 사용 설명서

First-time Operation

„ Setting up the computer
16
1
Set your computer to the Cradle.
l Set the computer to the cradle, and connect the external keyboard and mouse to the
cradle.
l Connect the AC adaptor to the Cradle and a power outlet.
The battery charging starts automatically.
CAUTION
l Do not remove the computer from the Cradle until the "First-time Operation" procedure is
completed.
l When using the computer for the first time, do not connect any peripheral device except
the battery pack, Cradle, keyboard, mouse and AC adaptor.
l Handling the AC adaptor
 Problems such as sudden voltage drops may arise during periods of thunder and lightning.
Since this could adversely affect your computer, an uninterruptible power source (UPS) is
highly recommended unless running from the battery pack alone.
NOTE
l After Windows setup, alternatively you can use without Cradle.
In that case, connect your computer to a power outlet.
The battery charging starts automatically.
2
Turn on the computer.
Press the power switch (A).
The power indicator
CAUTION
l Do not press the power switch repeatedly.
A
l The computer will be forcibly turned off if you press and hold the power switch for 4
seconds or longer.
l Once you turn off the computer, wait for 10 seconds or more before you turn on the
computer again.
l Do not perform the following operation until the drive indicator
 Connecting or disconnecting the AC adaptor
 Pressing the power switch
 Touching the screen, external keyboard or external mouse
l When the CPU temperature is high, the computer may not start up to prevent overheating of
the CPU. Wait until the computer cools down, and then turn the power on again. If the
computer does not power on even after cooling down, contact Panasonic Technical Support.
l Any changes from the default setting of the Setup Utility must not be made until the "First-
time Operation" procedure is completed.
3
<For MUI OS model>
Select language.
Select language and OS (32-bit or 64-bit).
CAUTION
Carefully choose your language because you cannot change it later. If you set
l
a wrong language, you need to reinstall Windows.
lights.
turns off.