Panasonic DMC-FT3 기본 사용 설명서 - 페이지 18
{카테고리_이름} Panasonic DMC-FT3에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic DMC-FT3 36 페이지.
Panasonic DMC-FT3에 대해서도 마찬가지입니다: 기본 사용 설명서 (36 페이지)
페이지 인쇄
∫ About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator A is turned on during charging.
The [CHARGE] indicator turns off:
The [CHARGE] indicator A will turn off once the charging has completed without
any problem.
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 oC to 30 oC.
–
The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
Charging time
Approximate operating time and number of recordable pictures
Number of recordable
pictures
Recording time
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].
•
Normal Picture Mode
•
Temperature: 23 oC/Humidity: 50%RH when LCD monitor is on.
•
Using a Panasonic SD Memory Card (32 MB).
•
Using the supplied battery.
•
Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [ON].)
•
Recording once every 30 seconds with full flash every second recording.
•
Changing the zoom magnification from Tele to Wide or vice versa in every
recording.
•
Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
•
Not using the GPS function.
Playback time
18
VQT3L38 (ENG)
Approx. 130 min
Approx. 310 pictures
Approx. 155 min
Approx. 300 min