Panasonic DMC-FT3 Basic Operating Instructions Manual - Page 18
Browse online or download pdf Basic Operating Instructions Manual for Digital Camera Panasonic DMC-FT3. Panasonic DMC-FT3 36 pages.
Also for Panasonic DMC-FT3: Basic Operating Instructions Manual (36 pages)
Print Page
∫ About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator A is turned on during charging.
The [CHARGE] indicator turns off:
The [CHARGE] indicator A will turn off once the charging has completed without
any problem.
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 oC to 30 oC.
–
The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
Charging time
Approximate operating time and number of recordable pictures
Number of recordable
pictures
Recording time
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].
•
Normal Picture Mode
•
Temperature: 23 oC/Humidity: 50%RH when LCD monitor is on.
•
Using a Panasonic SD Memory Card (32 MB).
•
Using the supplied battery.
•
Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [ON].)
•
Recording once every 30 seconds with full flash every second recording.
•
Changing the zoom magnification from Tele to Wide or vice versa in every
recording.
•
Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
•
Not using the GPS function.
Playback time
18
VQT3L38 (ENG)
Approx. 130 min
Approx. 310 pictures
Approx. 155 min
Approx. 300 min