Aquatec Equipment PondMax PS3500 사용 설명서 - 페이지 4

{카테고리_이름} Aquatec Equipment PondMax PS3500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquatec Equipment PondMax PS3500 8 페이지. Solar battery backup box

ASSEMBLING & OPERATION

Connect the input cable of the battery back up to the solar module or a DC power supply

and tighten the protection screw. The connectors are protected against reverse polarity.

Cable has specific connection which ONLY aligns one way. Don't insert the plug with

reverse polarity by using unnecessarily force.

The charge yellow led indicator lightens when the battery is being charged no matter

whether the system is ON or Off; otherwise the LED shuts off.

Electrically connect pumps and any other applicable DC equipment to the appropriate

output ports of the battery station. The rubber covers for output 1 and output 2 are used

to protect the ports when they are not in use. Remove the cover for the output and keep

it appropriately for possible needs in the future. The rubber cover for output 4 is used to

protect the ports ether in use or not in use. please remove the cover and fit it back after

output 4 is connected following below steps.

Turn the "system on/off" switch to the "on" position, the "system" indicator shows green

and the system is activated. The "system" indicator may show red and all outputs are

disabled when the battery operates for the first time, since the battery may lose its

energy while not in use in-store. It needs to be charged for no more than one day in bright

sunshine, then it shows green and all outputs ports are ready to output.

A Q U A T E C E Q U I P M E N T. C O M

PMAX PS3500 Battery Backup Instructions.indd 4

3/12/18 10:02 am