Aquatec Equipment PondMax PS3500 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для фотоапаратів Aquatec Equipment PondMax PS3500. Aquatec Equipment PondMax PS3500 8 сторінок. Solar battery backup box
Друкувати сторінкуASSEMBLING & OPERATION
Connect the input cable of the battery back up to the solar module or a DC power supply
and tighten the protection screw. The connectors are protected against reverse polarity.
Cable has specific connection which ONLY aligns one way. Don't insert the plug with
reverse polarity by using unnecessarily force.
The charge yellow led indicator lightens when the battery is being charged no matter
whether the system is ON or Off; otherwise the LED shuts off.
Electrically connect pumps and any other applicable DC equipment to the appropriate
output ports of the battery station. The rubber covers for output 1 and output 2 are used
to protect the ports when they are not in use. Remove the cover for the output and keep
it appropriately for possible needs in the future. The rubber cover for output 4 is used to
protect the ports ether in use or not in use. please remove the cover and fit it back after
output 4 is connected following below steps.
Turn the "system on/off" switch to the "on" position, the "system" indicator shows green
and the system is activated. The "system" indicator may show red and all outputs are
disabled when the battery operates for the first time, since the battery may lose its
energy while not in use in-store. It needs to be charged for no more than one day in bright
sunshine, then it shows green and all outputs ports are ready to output.
A Q U A T E C E Q U I P M E N T. C O M
PMAX PS3500 Battery Backup Instructions.indd 4
3/12/18 10:02 am