HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼 - 페이지 16

{카테고리_이름} HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 48 페이지. Storageworks modular smart array controller, cache, and battery replacement instructions
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대해서도 마찬가지입니다: 관리 매뉴얼 (40 페이지), 릴리스 노트 (13 페이지), 빠른 시작 지침 (8 페이지), 릴리스 노트 (8 페이지), 릴리스 노트 (8 페이지), 빠른 시작 매뉴얼 (7 페이지), 릴리스 노트 (5 페이지), 교체 지침 (4 페이지)

페이지 인쇄
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼
Introduction

System Power

Power to the MSA1000 does not shut off completely with the power switch. The
two positions of the front panel power switch should be considered as on and
standby, instead of on and off. The standby position removes power from most of
the electronics and the drives, but portions of the power supply and some internal
circuitry remain active.
Consequently, to remove all power from the MSA1000 storage system, you must
disconnect the power cord from the storage system. In environments with multiple
power supplies, you must disconnect all power cords to remove power completely
from the MSA1000 storage system.

Maximum Storage

A maximum of 14 1-inch Universal drives can be installed in the MSA1000. Up to
two additional external storage enclosures can be cascaded from the MSA1000,
expanding the capacity to 42 drives. Refer to the MSA1000 website:
www.hp.com/go/msa1000, for the most up-to-date information on supported
drives and enclosures.
Note:
storage attached to your MSA1000, you must create multiple logical units.
16
To reduce the risk of electric shock or damage to the equipment,
WARNING:
disconnect power from the storage system by unplugging all power cords from
either the electrical outlet or the storage system.
The maximum size of a logical unit is 2 TB. If you have more than 2 TB of
HP StorageWorks 1000 Modular Smart Array Reference Guide