HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼 - 페이지 18

{카테고리_이름} HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 48 페이지. Storageworks modular smart array controller, cache, and battery replacement instructions
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter에 대해서도 마찬가지입니다: 관리 매뉴얼 (40 페이지), 릴리스 노트 (13 페이지), 빠른 시작 지침 (8 페이지), 릴리스 노트 (8 페이지), 릴리스 노트 (8 페이지), 빠른 시작 매뉴얼 (7 페이지), 릴리스 노트 (5 페이지), 교체 지침 (4 페이지)

페이지 인쇄
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 참조 매뉴얼
MSA1000 Hardware Components

MSA1000 Controller

The MSA1000 Controller is a drive array controller specifically designed for
installation in the MSA1000. The MSA1000 comes equipped with one Controller
installed. An additional controller for redundancy can be purchased separately.
To ensure uninterrupted service, two copies of the controller firmware are stored
in Read Only Memory (ROM) on the controller.
Additional information about the following topics is included in this section:
■
■
■

MSA1000 Controller Display

Each array controller in an MSA1000 contains an integrated Liquid Crystal
Display (LCD). This module is used for displaying informational and error
messages, showing the status of the module, and for providing user input when
required. Traditional Power-On Self-Test (POST) messages issued by PCI-based
array controllers have been combined with runtime event notification messages to
create a new set of controller display messages.
The following figure and supporting table illustrate and define the features of the
MSA1000 controller display panel.
18
MSA1000 Controller Display
Array Accelerator (Battery-backed Cache)
Array Configuration Overview
HP StorageWorks 1000 Modular Smart Array Reference Guide