HP 5120 SI Series 설치 매뉴얼 - 페이지 20

{카테고리_이름} HP 5120 SI Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 5120 SI Series 48 페이지. 5120 si switch series
HP 5120 SI Series에 대해서도 마찬가지입니다: 사양 (33 페이지)

페이지 인쇄

1. Setting up the Configuration Environment

Tighten the screws on the plug with a flat-blade screwdriver to secure the plug in the RPS

receptacle (see callout 2 in

Connect the other end of the power cord to the RPS.

Make sure the RPS is supplying power and verify that the RPS status LED is ON.

Figure 19 Connecting the RPS cable to the –52 to –55 RPS receptacle

Verifying the installation

After you complete the installation, verify that:



There is enough space for heat dissipation around the switch, and the rack or workbench is

stable.



The grounding cable is securely connected.



The correct power source is used.



The power cords are correctly connected.



All the interface cables are cabled indoors. If any cable is routed outdoors, verify that the socket

strip with lightning protection and lightning arresters for network ports have been correctly

connected.

Figure

19).