HP 5120 SI Series Installation Manual - Page 20
Browse online or download pdf Installation Manual for Switch HP 5120 SI Series. HP 5120 SI Series 48 pages. 5120 si switch series
Also for HP 5120 SI Series: Specification (33 pages)
Print Page
3.
Tighten the screws on the plug with a flat-blade screwdriver to secure the plug in the RPS
receptacle (see callout 2 in
4.
Connect the other end of the power cord to the RPS.
5.
Make sure the RPS is supplying power and verify that the RPS status LED is ON.
Figure 19 Connecting the RPS cable to the –52 to –55 RPS receptacle
Verifying the installation
After you complete the installation, verify that:
There is enough space for heat dissipation around the switch, and the rack or workbench is
stable.
The grounding cable is securely connected.
The correct power source is used.
The power cords are correctly connected.
All the interface cables are cabled indoors. If any cable is routed outdoors, verify that the socket
strip with lightning protection and lightning arresters for network ports have been correctly
connected.
Figure
19).
2
2
1
16