AQUATECH CAN165BM-100 매뉴얼 - 페이지 4

{카테고리_이름} AQUATECH CAN165BM-100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQUATECH CAN165BM-100 19 페이지. 165 series birm filter

MENU BUTTON " ":

CHANGE / REGEN "

UP / DOWN "

System Initialization

When power is supplied to the control, the screen will display TIME OF DAY AND DEFAULT GALLON SETTING. If the valve is not in

service it will read "CANATURE" while the valve returns to the service position.

Mixed Regeneration Option

This is an option that can be used on filtration units. This will enable the unit to be set for gallons between regenerations with a

frequency of days as an override to ensure the media bed stays in optimal working order.

Control Operation During A Power Failure

In the event of a power failure, the valve will keep track of the time and day for 48 hours. The programmed settings are stored in

a non-volatile memory and will not be lost during a power failure. If power fails while the unit is in regeneration, the valve will

return to the service position once power is restored. If the valve misses a scheduled regeneration due to a power failure, it will

queue regeneration at the next regeneration time once power is restored.

Figure 1. Valve Display

The function of this key to enter the level one programming mode where the valve settings can be

adjusted.

This button has two functions. The first is to initiate a manual regeneration by the second

function is while in programming mode, pressing this key allows the user to change the value

of each setting.

These buttons are used to increase or decrease the value of the settings while in the

programming mode.

Display

DISPLAY

DOWN

Down

SET&REGEN.

Change Program

Manual Regeneration