HP ProCurve 1600M 먼저 읽기 - 페이지 2

{카테고리_이름} HP ProCurve 1600M에 대한 먼저 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve 1600M 8 페이지. Redundant power supply
HP ProCurve 1600M에 대해서도 마찬가지입니다: 사양 시트 (12 페이지), 검토자 매뉴얼 (27 페이지), 보충 설명서 (2 페이지), 보충 설명서 (2 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (36 페이지), 설치 매뉴얼 (28 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (4 페이지), 사용자 설명서 (8 페이지), 매뉴얼 보충 자료 (28 페이지), 먼저 읽기 (16 페이지), 설치 및 제거 (2 페이지), 설치 매뉴얼 (12 페이지), 계획 및 구현 매뉴얼 (40 페이지), 제품 수명이 다한 제품 분해 지침 (2 페이지), 설치 매뉴얼 (46 페이지), 진단 매뉴얼 (2 페이지), 분해 지침 (2 페이지)

Module Installation

C a u ti o n — R o u ti n g S w it c h 9 3 0 4 M a n d 9 30 8 M

To avoid hardware damage during module installation, be careful to properly line up the edges of the module

board with the guides built into the module slot on the chassis.

You can initially access the routing switch in either of the following ways:

Via Telnet or FTP through port 1 on the management module, using the factory default IP address (209.157.22.254)

and subnet mask (255.255.255.0)

By connecting a terminal device to the serial port on the management module

Note: HP recommends that you use the console cable provided with the routing switch. If you need to use a different

cable, please see the "Console Cable" entry under "Accessory Parts List" on the next page.

After you have accessed the routing switch, change the default IP address and subnet mask to correspond to your network's

addressing scheme. For more on assigning an IP address and other topics, see the following:

Topic

Installation Procedures and Precautions

Attaching a Terminal Device and Assigning an IP

Address

Using Redundant Management Modules

System Boot from a Bootp Server

Software Overview

Hardware Overview and Specifications

Enabling Telnet

HP TopTools for Switches & Hubs is a breakthrough in network management software that gives you more network with

less work. The TopTools for Switches & Hubs CD is included at no extra charge with your HP ProCurve routing switch. See

the system requirements printed on the sleeve containing the HP TopTools CD.

Location in the Installation

and Configuration Guide

Chapter 2

Chapter 3

Appendix B

Chapter 5

Chapter 6

Chapters 2 (pp. 2-28, 2-29) and 5 (p. 5-9)