HP ProCurve J4864A 설치 매뉴얼 - 페이지 27

{카테고리_이름} HP ProCurve J4864A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve J4864A 36 페이지. Switch gl modules
HP ProCurve J4864A에 대해서도 마찬가지입니다: 설치 매뉴얼 (38 페이지)

페이지 인쇄

1. Descriptions

Connectors

Twisted-Pair

10/100Base-TX RJ-45 – On the 10/100-TX GL Module.

■

They are compatible with the IEEE 802.3 10Base-T and 802.3u 100Base-

TX standards and accept the 10 Mbps or 100 Mbps cables listed below.

■

100/1000Base-T RJ-45 – On the 100/1000-T GL Module and the

100/1000-T Transceiver.

They are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab

1000Base-T standards, and accept the 100 Mbps or 1000 Mbps cables listed

on the next page.

Fiber-Optic

100Base-FX SC – On the 100-FX SC Transceiver.

■

100Base-FX MTRJ – On the 100-FX GL Module.

Both 100Base-FX connectors transmit at 1300 nm wavelength, and are

compatible with the IEEE 802.3u 100Base-FX standard. They accept the

multimode fiber-optic cables for 100Base-FX described on page 23.

Gigabit-SX SC – On the Gigabit-SX Transceiver.

■

Gigabit-SX LC – On the Gigabit-SX mini-GBIC.

■

Both Gigabit-SX connectors transmit at 850 nm wavelength, and are

compatible with the IEEE 802.3z Gigabit-SX standard. They accept the

low metal content, multimode fiber-optic cables for Gigabit-SX described

on page 23.

Gigabit-LX SC – On the Gigabit-LX Transceiver.

■

Gigabit-LX LC – On the Gigabit-LX mini-GBIC.

Both Gigabit-LX connectors transmit at 1300 nm wavelength, and are

compatible with the IEEE 802.3z Gigabit-LX standard. They accept the

low metal content, single-mode or multimode fiber-optic cables for

Gigabit-LX described on page 23.

■

Gigabit-LH LC – On the Gigabit-LH mini-GBIC.

Transmits at 1300 nm wavelength, and accepts the low metal content,

single-mode fiber-optic cables for Gigabit-LH described on page 23.

Specifications