HP StorageWorks 16-EL - SAN Switch 사용자 설명서 - 페이지 15
{카테고리_이름} HP StorageWorks 16-EL - SAN Switch에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 16-EL - SAN Switch 22 페이지. Fabric os 3.1.2
HP StorageWorks 16-EL - SAN Switch에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (20 페이지), 펌웨어 릴리스 노트 (14 페이지), 릴리스 노트 (32 페이지)
페이지 인쇄
Installing Remote Switch
A Remote Switch fabric requires two switches that are HP StorageWorks SAN
Switch 2Gb (version 3x) or (version 4x) or StorageWorks Core Switches, with the
switches configured the same.
Installing Remote Switches requires the installation of a separate license on each
of the two switches. Licenses may have been installed on the switches at the
factory. If not, contact your switch supplier to obtain a license key.
You can install a Remote Switch license either through telnet or through
Advanced Web Tools.
Installing Remote Switch Using Telnet
To install a Remote Switch using telnet:
1. Login to the switch as the admin user.
2. To determine whether a Remote Switch license is already installed, enter
3. Enter the following at the command line:
4. Verify the license was added by entering the following on the command line:
HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide
licenseShow on the telnet command line.
A list of all the licenses currently installed on the switch display as shown in
the following example:
switch:admin> licenseShow
cQebzbRdScRfcOiK:
Web license
Zoning license
AybbzQQ9edTzcc0X:
Extended Fabric license
If the Remote Switch license is listed, the feature is installed and immediately
available. Skip
step 3
licenseAdd "key"
"key" is the license key provided to you, enclosed in quotation marks. The
license key is case sensitive and must be entered exactly shown.
licenseShow
If the Remote Switch license is listed, the feature is installed and immediately
available. If the license is not listed, repeat
and
step
4.
step
3.
Remote Switch
15