HP StorageWorks 16-EL - SAN Switch Kullanıcı Kılavuzu - Sayfa 15

Anahtar HP StorageWorks 16-EL - SAN Switch için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HP StorageWorks 16-EL - SAN Switch 22 sayfaları. Fabric os 3.1.2
Ayrıca HP StorageWorks 16-EL - SAN Switch için: Güncelleme Kılavuzu (9 sayfalar), Kurulum Talimatları Kılavuzu (20 sayfalar), Ürün Yazılımı Sürüm Notları (14 sayfalar), Yayın Notu (32 sayfalar)

Installing Remote Switch

A Remote Switch fabric requires two switches that are HP StorageWorks SAN

Switch 2Gb (version 3x) or (version 4x) or StorageWorks Core Switches, with the

switches configured the same.

Installing Remote Switches requires the installation of a separate license on each

of the two switches. Licenses may have been installed on the switches at the

factory. If not, contact your switch supplier to obtain a license key.

You can install a Remote Switch license either through telnet or through

Advanced Web Tools.

To install a Remote Switch using telnet:

1. Login to the switch as the admin user.

2. To determine whether a Remote Switch license is already installed, enter

3. Enter the following at the command line:

4. Verify the license was added by entering the following on the command line:

HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide

licenseShow on the telnet command line.

A list of all the licenses currently installed on the switch display as shown in

the following example:

switch:admin> licenseShow

cQebzbRdScRfcOiK:

Web license

Zoning license

AybbzQQ9edTzcc0X:

Extended Fabric license

If the Remote Switch license is listed, the feature is installed and immediately

available. Skip

step 3

licenseAdd "key"

"key" is the license key provided to you, enclosed in quotation marks. The

license key is case sensitive and must be entered exactly shown.

licenseShow

If the Remote Switch license is listed, the feature is installed and immediately

available. If the license is not listed, repeat

and

step

Remote Switch