HP StorageWorks 8B - FC Entry Switch 매뉴얼 - 페이지 12

{카테고리_이름} HP StorageWorks 8B - FC Entry Switch에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 8B - FC Entry Switch 50 페이지. Fabric os release notes version 3.0.1b
HP StorageWorks 8B - FC Entry Switch에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (20 페이지), 사용자 설명서 (22 페이지), 펌웨어 릴리스 노트 (14 페이지), 설치 매뉴얼 (14 페이지), 릴리스 노트 (26 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (30 페이지), 릴리스 노트 (16 페이지)

페이지 인쇄
HP StorageWorks 8B - FC Entry Switch 매뉴얼
1
Setting the Initial Configuration

Enabling Licensed Features

Licensed features are already loaded onto the switch firmware, but must be enabled with a license
key. Once you have purchased these features you are provided with a key to unlock the feature.
To enable a licensed feature:
1.
Login to the switch as the admin user.
2.
At the command line enter the following command:
licenseAdd "aaaBbbCcc"
where aaaBbbCcc is the license key for a particular feature.
Note:

Displaying the Installed Feature Licenses

To display what features have been enabled on a switch:
1.
Login to the switch as the admin user.
2.
At the command line enter the following command:
licenseShow
This command displays the license keys that have been entered for the switch and the features
enabled by those licenses.

Changing the Admin Password and User ID

For security reasons, the first time you log into the Fabric OS you are requested to change the
admin user ID and system password.
To change the Admin user ID and password:
1.
Login to the switch as the admin user.
2.
At the command line enter the following command:
Password "admin"
An interactive session is opened and you are prompted for configuration values.
3.
At the New username prompt, enter a new name for the admin user. You can change the name
of the admin user without changing the password. Press enter to leave the name as is.
4.
At the Old Password prompt, enter the old password.
5.
At the New password prompt, enter the new password. The new password must be from 8 to
40 characters in length.
6.
At the Re-enter new password prompt, enter the new password exactly as entered to the
previous prompt.
7.
Press the enter key to commit the configuration to the firmware.
1-2
You must enter a license key for each feature to activate. License keys are case sensitive.
Fabric OS Procedures Guide