HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 설치 지침 매뉴얼 - 페이지 13
{카테고리_이름} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 페이지. 1u rackmount tape enclosure
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 매뉴얼 (14 페이지), 릴리스 노트 (14 페이지), 설치 지침 (2 페이지), 참조 매뉴얼 (46 페이지)
페이지 인쇄
Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack)
SAN Switch Rack Mount Kit Installation Instructions
b. Depending on the rack you are using, complete one of the following tasks:
— For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Figure
5.
13