HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 설치 매뉴얼 - 페이지 3
{카테고리_이름} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 페이지. 1u rackmount tape enclosure
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 지침 매뉴얼 (20 페이지), 릴리스 노트 (14 페이지), 설치 지침 (2 페이지), 참조 매뉴얼 (46 페이지)
페이지 인쇄
Installing the Switch in a Rack Using the SAN Switch Universal
Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/32, SAN
Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series
or comparable EIA rack using the SAN Switch Universal Rack Mount Kit, part
number 331148-B21.
Figure 1: SAN Switch 2/16 rack-mounted switch
Note:
The following items are required to install the switch in a rack:
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
The Universal Rack Mount Kit installation requires two technicians.
SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8
Power cables
#2 Phillips screwdriver
7/16-inch wrench or socket
The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware
listed below:
(2) Rear mounting brackets
1
Addendum Pg