HP StorageWorks Core Switch 2/64 릴리스 노트 - 페이지 8

{카테고리_이름} HP StorageWorks Core Switch 2/64에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks Core Switch 2/64 11 페이지. Director power cord advisory instruction
HP StorageWorks Core Switch 2/64에 대해서도 마찬가지입니다: 빠른 사양 (13 페이지), 릴리스 노트 (27 페이지), 릴리스 노트 (24 페이지), 릴리스 노트 (20 페이지), 릴리스 노트 (13 페이지), 지침 (1 페이지)

페이지 인쇄

Known Issues

HSG80 Transparent Mode Not Recommended with Controller

in SCSI-3 Mode with HP-UX Operating Systems

Due to an issue with non-existent duplicate LUNs being displayed with the HP-UX

operating systems, the HSG80 controller is restricted to SCSI-2 mode of operation

when set to Transparent failover mode.

SCSI-3 mode of operation in Multibus failover mode is fully supported with the use of

Secure Path software, Version 3.0.

Workaround

None.

ISL Disconnect Causes NOS Error with the OpenVMS

Operating Systems

When an ISL connection is physically removed between directors or switches, the

Fibre Channel Adapter model FCA2354 transmits a Not Operational Sequence (NOS)

error. This is observed as an entry in the HAFM server Link incident log for the port in

which the FCA2354 is attached. The director's Hardware View also displays a yellow

triangle icon over the port that detected this incident. The fabric operation or data

movement is not disrupted by these incidents, which can be cleared using the

following procedure.

Workaround

Use these steps to clear the incident alerts.

1. At the HAFM Hardware View, click the port module to open the Port Card

View.

2. Right click on the port with the yellow triangle icon, and choose Clear Link

Incident Alert(s).

Disconnecting the Null Modem Cable

Always log out and disconnect the Null Modem cable from the serial maintenance

port when not in use or when the switch is reset.

director release notes