HP StorageWorks Core Switch 2/64 릴리스 노트 - 페이지 10

{카테고리_이름} HP StorageWorks Core Switch 2/64에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks Core Switch 2/64 11 페이지. Director power cord advisory instruction
HP StorageWorks Core Switch 2/64에 대해서도 마찬가지입니다: 빠른 사양 (13 페이지), 릴리스 노트 (27 페이지), 릴리스 노트 (24 페이지), 릴리스 노트 (20 페이지), 릴리스 노트 (13 페이지), 지침 (1 페이지)

페이지 인쇄

Known Issues

Ports May Accumulate Spurious Events

A port may accumulate "Invalid transmission word" and "Bit-Error Threshold Link

Incident" events when a transceiver is poorly seated resulting in a poor ground

connection.

Workaround

Reseating the optical transceiver will correct the problem.

Director Properties Description May Be Incorrect

The text shown in the Description field of the Director Properties panel for the

Director 2/140 may be incorrect. It may show SAN Director 64. This has no

effect on the operation of the Director 2/140. This is a user-configurable description

for the director, and may be changed to whatever you want by choosing Configure >

Identification using HAFM, or by choosing Configure > Director > Identification

using the Embedded Web Server interface.

IML Is Required After Performing a Configuration Reset

If a Reset Configuration is performed on a Director 2/140 to reset the director to

factory configuration, an initial machine load (IML) is required to be performed to

complete the process. This is done by pressing the white button on the front of either

CTP card for more than three seconds. This can also be accomplished by turning the

power to the Director 2/140 off, and then back on.

director release notes