HP V1910 시작하기 매뉴얼 - 페이지 27

{카테고리_이름} HP V1910에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP V1910 44 페이지.

NOTE:

If support trays are provided on the rack, you can mount the switch to the rack with mounting brackets and

trays. To do so, put the switch on the support tray and slide the switch to an appropriate location, and then

fix the mounting brackets.

Mounting the switch on a workbench

In many cases, standard 19-inch racks are not available. Switches are often placed on clean

workbenches. To place the switch on a workbench, follow these steps:

Place the switch with bottom up carefully, and then clean the round holes on the chassis bottom with dry

Step1

cloth.

Attach the rubber feet to the four round holes on the chassis bottom.

Step2

Place the switch with upside up on the workbench.

Step3

During the operation, you simply need to follow these guidelines:

Make sure that the workbench is flat and sturdy.



Ensure good ventilation and a space of 10 cm (3.94 in) around the chassis for heat dissipation.



Avoid heavy objects on the switch.

