HP XP20000/XP24000 릴리스 노트 - 페이지 6

{카테고리_이름} HP XP20000/XP24000에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP XP20000/XP24000 13 페이지. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
HP XP20000/XP24000에 대해서도 마찬가지입니다: 통합 매뉴얼 (29 페이지), 릴리스 노트 (4 페이지), 관리자 매뉴얼 (50 페이지), 구성 매뉴얼 (42 페이지), 구성 매뉴얼 (40 페이지), 구성 매뉴얼 (40 페이지), 구성 매뉴얼 (36 페이지), 구성 매뉴얼 (36 페이지), 구성 매뉴얼 (30 페이지), 구성 매뉴얼 (36 페이지), 릴리스 노트 (5 페이지), 구성 매뉴얼 (46 페이지), 구성 매뉴얼 (46 페이지), 참조 매뉴얼 (46 페이지), 구성 매뉴얼 (40 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (38 페이지), 구성 매뉴얼 (34 페이지), 구성 매뉴얼 (30 페이지), 구성 매뉴얼 (30 페이지)

페이지 인쇄

•

Red Hat Enterprise Linux (RHEL) 4.5, 4.6, 5, 5.1, and 5.2

•

SUSE Linux Enterprise Server (SLES) 9, SP3 and SP4; 10, SP1 and SP2

•

HP-UX 11.23, 11.31

At this time, HP-UX is not supported with firmware 8.0.2.02.00. Support is expected in March 2009.

For more details and the most recent information on supported operating systems, see the HP

StorageWorks SAN Design reference guide located on the HP website:

sandesignguide, or contact an HP storage representative for the latest support information.

Supported configurations

For supported configuration information, see the HP StorageWorks SAN design reference guide,

available on the HP website: http://www.hp.com/go/sandesignguide.

Enhancements

This section describes enhancements for the firmware 8.0.2.02.00 release.

Transparent Router

Transparent Router (TR) functionally provides seamless and transparent connectivity of 8/20q Fibre

Channel Switches to HP B-Series fabrics. TR functionality allows each port on the 8/20q Fibre Channel

Switch to be configured as a TR port, enabling the sharing of server and storage resources between

SANs through the industry-standard NPIV protocol. TR functionality eliminates the support and

management challenges of E_Port switch interoperability. TR functionality also provides a higher level

of security by ensuring that only customer-specified devices are visible and shareable between fabrics.

For more details and the most recent information on supported B-Series switches, see the HP

StorageWorks SAN Design reference guide located on the HP website:

sandesignguide, or contact an HP storage representative for the latest support information

Fixes

The following issues have been fixed in this release (since the release of firmware version 7.6.0.02.00).

The Offline Switch Diagnostics type Connectivity was not available in QuickTools.

•

When running internal port diagnostics on a switch, intermittent failures may have occurred with

interswitch links.

•

If the accounting server option was enabled and multiple Windows RADIUS servers were configured

and available on the network, and if network performance varied, the message All RADIUS

servers failed to respond may have been displayed when authentication was attempted.

•

In the CLI, you could not edit the Binding attribute in the security configuration if FabricBindin-

gEnabled was disabled.

•

Replacing an SFP while running port and/or switch diagnostics resulted in the clearing of media

information.

•

QuickTools dialogs are modal, that is, designed to stay on top of a parent window or pop to the

top of a parent window when the parent window is selected. On Linux platforms, there is a known

issue for the Java plug-in (Sun bug #4739735), where the code to identify the parent frame does

not work correctly. The result was that all the dialogs acted as if they were non-modal, and they

could appear on top of or behind their parent window, and the parent was locked up by the

dialog. This situation occurred when switching between other applications while using QuickTools

http://www.hp.com/go/